Immunochromatography screening devices for cannabinoids in oral fluid sample

Abstract Cannabis sativa L. is one of the most consumed drugs in the world and recent studies have associated its use with an increase in the number of traffic accidents in different countries. In many countries, like Brazil, simple and reliable methodologies are still needed for the detection of drugs on site, mainly cannabinoids, considering its prevalence of use and oral fluid (OF) has been proved as an appropriate biological matrix for this purpose. Considering that, this work aims to review previous studies on immunochromatographic devices for on-site detection of cannabinoids in OF, discussing their sensitivity, specificity, cut-offs values and confirmatory methods. This data shows the importance of choosing a screening device and it reinforces the need for its implementation in Brazil. The research was conducted on 5 databases and all original articles, published in the last 10 years, were selected. A total of 32 articles were found, providing data for 17 screening devices of distinct brands. Only 2 screening devices showed satisfactory sensitivity and specificity in the evaluated studies (≥80% and ≥90% respectively). However, it should be considered that the screening devices still have some limitations, such as a higher cut-off than those recommended by international guidelines (cut-off > 2 ng/mL), therefore demonstrating the need for more studies in the area and the importance of confirmatory analysis usually fulfilled by LC-MS/MS, GC-MS/MS or GC-MS. Thus, the screening analyzes should not be evaluated by itself, but in association with confirmatory results and observational traits (behavioral changes), for a better understanding of the traffic scenario

Paper-based lateral flow assay using rhodamine B-loaded polymersomes for the colorimetric determination of synthetic cannabinoids in saliva.

Synthetic cannabinoids are one of the many substances of abuse widely spreading in modern society. Medical practitioners and law enforcement alike highly seek portable, efficient, and reliable tools for on-site detection and diagnostics. Here, we propose a colorimetric lateral flow assay (LFA) combined with dye-loaded polymersome to detect the synthetic cannabinoid JWH-073 efficiently. Rhodamine B-loaded polymersome was conjugated to antibodies and fully characterized. Two LFA were proposed (sandwich and competitive), showing a high level of sensitivity with a limit of detection (LOD) reaching 0.53 and 0.31 ng/mL, respectively. The competitive assay was further analyzed by fluorescence, where the LOD reached 0.16 ng/mL. The application of the LFA over spiked synthetic saliva or real human saliva demonstrated an overall response of 94% for the sandwich assay and 97% for the competitive LFA. The selectivity of the system was assessed in the presence of various interferents. The analytical performance of the LFA system showed a coefficient of variation below 6%. The current LFA system appears as a plausible system for non-invasive detection of substance abuse and shows promise for synthetic cannabinoid on-site sensing.

Roadside Drug Testing Approaches.

The purpose of this review is to present an overview of roadside drug testing, driving enforcement, and drunk/drug driving detection around the world. Drunk and drug driving is a severe problem, not only in the UAE, but also around the world. This has important implications for road safety as drunk or drug driving may increase the chances of a driver's involvement in a road crash when compared to a drug-free driver. Recently, due to increases in drug-impaired drivers' crash involvement, many mobile roadside drug testing devices have been introduced to the market. These devices use oral fluid, urine or blood matrices. These are on-the-spot tests, which are easy to use and are applied by law enforcement agencies and the public. Law enforcement agencies most commonly use oral fluid to detect the presence of illicit drugs in drivers. This review discusses all the available devices in the market used by the authorities. It also describes the type of drugs widely abused by drivers along with behavioral testing methods. The different types of matrices used for roadside drug testing are also evaluated. Sample collection, storage, and pre-treatment methods are discussed, followed by the confirmatory analysis of positive samples. This article will significantly help law enforcement agencies compare and evaluate all the reliable roadside testing devices and new emerging confirmatory devices available to them in the market. This will help them make an informed decision on which device to adapt to their individual needs.

All solid-state miniaturized potentiometric sensors for flunitrazepam determination in beverages.

Flunitrazepam is one of the frequently used hypnotic drugs to incapacitate victims for sexual assault. Appropriate diagnostic tools should be available to victims regarding the growing concern about "date-rape drugs" and their adverse impact on society. Miniaturized screen-printed potentiometric sensors offer crucial point-of-care devices that alleviate this serious problem. In this study, all solid-state screen-printed potentiometric flunitrazepam sensors have been designed. The paper device was printed with silver and carbon ink. Formation of an aqueous layer in the interface between carbon-conducting material and ion-sensing membrane nevertheless poses low reproducibility in the solid-contact electrodes. Accordingly, poly(3,4-ethylenedioxythiophene) (PEDT) nano-dispersion was applied as a conducting hydrophobic polymer on the electrode surface to curb water accumulation. Conditioning of ion-sensing membrane in the vicinity of reference membrane has been considered carefully using special protocol. Electrochemical characteristics of the proposed PEDT-based sensor were calculated and compared favorably to PEDT-free one. The miniaturized device was successfully used for the determination of flunitrazepam in carbonated soft drinks, energy drink, and malt beverage. Statistical comparison between the proposed sensor and official method revealed no significant difference. Nevertheless, the proposed sensor provides simple and user-friendly diagnostic tool with less equipment for on-site determination of flunitrazepam.

A clinical investigation into the ability of subjects with lung disease to provide breath specimens using the EvidenzerIRL evidential breath analyser in alcohol intoxicant driving in criminal justice evidence.

The EvidenzerIRL instrument has been in use as an evidential breath analyser in the application of drink driving laws in the Republic of Ireland since 2011. The result of the analysis is used as evidence in prosecutions before the Courts in per se offences of driving under the influence of alcohol as distinct from screening results at the roadside. This study aims to assist doctors, lawyers and judges in assessing drivers' failure to provide valid evidential breath specimens. Since the introduction of the EvidenzerIRL, approximately 10% of evidential breath tests annually result in failure or refusal to provide a successful breath specimen, this is an offence under Irish road traffic laws. The presence of lung disease has been given as a reason for the driver failing to provide evidential breath specimens. The aim of this study is to assess the ability of subjects with lung disease to provide breath specimens using the EvidenzerIRL. Pulmonary function tests (PFT) were carried out on volunteers from outpatients of the pulmonary laboratory in St Vincent's University Hospital, Dublin (n = 58) and a control group with no underlying lung disease (n = 19). After the PFTs all volunteers were asked to provide breath specimens using the EvidenzerIRL. Fourteen (24%) out of 58 lung disease volunteers failed to provide a breath specimen, no one from the control group was unsuccessful. Thirteen females and one male volunteer could not successfully provide. Female volunteers were more likely to fail to provide than male volunteers. A significant difference was found between the median age of successful (62.2 years) and unsuccessful (69.2 years) lung disease volunteers. Only one PFT, percentage predicted of Forced Expiratory Volume in 1 second (FEV1), had a significant difference between the mean of successful (86.6%) and unsuccessful (66.5%) lung disease volunteers. A subject with lung disease was more likely to be successful than unsuccessful. Drivers' effort and operators' guidance through the process were found to be crucial parts to a successful outcome.

Evaluation of the diagnostic performance of an oral fluid screening test device for substance abuse at traffic controls.

INTRODUCTION: The aim of this study was to evaluate the analytical performance of the Kite Biotechnology Oral fluid (OF) screening test device, which is used for roadside screening of cannabis, opiates, amphetamines, methamphetamine, 3,4-methylenedioxymethamphetamine (MDMA), cocaine and benzodiazepines by comparing samples with matched plasma samples, analysed via liquid chromatography-tandem mass spectrometry (LC-MS/MS) for confirmation. METHODS: OF and plasma samples were obtained simultaneously from a total of 100 subjects. OF samples were analysed by OF screening test based on immunochromatography. The OF screening test cut-off values were 50 ng/mL for amphetamines (d-amphetamine) and methamphetamine/MDMA (d-methamphetamine), 30 ng/mL for cocaine (benzoylecgonine), 40 ng/mL for opiates (morphine), 20 ng/mL for benzodiazepines (nordazepam), and 25 ng/mL for cannabis (Δ9-tetrahydrocannabinol). LC-MS/MS method validation was performed according to the CLSI C62-A recommendations with the following parameters: matrix effect, lower limit of quantification (LLOQ), linearity, intra-day and inter-day precision and accuracy. RESULTS: The overall specificity, accuracy and negative predictive values (NPV) were acceptable and met the DRUID standard of >80%. The OF screening test device showed good sensitivity for cocaine, amphetamines and opiates, whereas it indicated poor sensitivity for methamphetamine/MDMA (66.7%) and failed to detect cannabis and benzodiazepines. CONCLUSION: The present study is the first report to evaluate the Kite Biotechnology OF screening test device. The diagnostic performance of the OF screening test device was acceptable for opiates, cocaine and amphetamines, but it was insufficient for methamphetamine/MDMA, benzodiazepines and cannabis because of sensitivity issues.

Rapid Characterization of Drugs in Biological Fluid and Seized Material Using Thermal-Assisted Carbon Fiber Ionization Mass Spectrometry.

Developing a rapid, simple, and sensitive method to analyze drugs is critical to forensic research study because of the widespread occurrence of the matrix effect. Herein, we develop a method using thermal-assisted carbon fiber ionization mass spectrometry that can be used to directly analyze drugs in biological fluid. The key feature of this technique is that the biological samples such as urine and blood can be achieved online as precipitated protein on the carbon fiber tip and thermally desorbed by the metal ceramics heater, which can reduce the matrix effects and improve the sensitivity. Analytes including raw urine, blood, oral fluid, drink, tobacco tar, drug tablets, and paper cards can be rapidly identified and analyzed within a few minutes regardless of their physical variations. Due to its simplicity and noninvasive analysis, this method can be used for drugged driving analysis and to achieve point-of-care drug testing in clinical and forensic chemistry.

Implementing an integrated multi-technology platform for drug checking: Social, scientific, and technological considerations.

The illicit drug overdose crisis in North America continues to devastate communities with fentanyl detected in the majority of illicit drug overdose deaths. The COVID-19 pandemic has heightened concerns of even greater unpredictability in the drug supplies and unprecedented rates of overdoses. Portable drug-checking technologies are increasingly being integrated within overdose prevention strategies. These emerging responses are raising new questions about which technologies to pursue and what service models can respond to the current risks and contexts. In what has been referred to as the epicenter of the overdose crisis in Canada, a multi-technology platform for drug checking is being piloted in community settings using a suite of chemical analytical methods to provide real-time harm reduction. These include infrared absorption, Raman scattering, gas chromatography with mass spectrometry, and antibody-based test strips. In this Perspective, we illustrate some advantages and challenges of using multiple techniques for the analysis of the same sample, and provide an example of a data analysis and visualization platform that can unify the presentation of the results and enable deeper analysis of the results. We also highlight the implementation of a various service models that co-exist in a research setting, with particular emphasis on the way that drug checking technicians and harm reduction workers interact with service users. Finally, we provide a description of the challenges associated with data interpretation and the communication of results to a diverse audience.

Evaluation and applicability of Alere iCup DX 14 for rapid postmortem urine drug screening at autopsy.

Performing point-of-care urine drug screen testing at autopsy by a forensic pathologist may provide an early indication of the presence of analytes of interest during autopsy. An evaluation for the screening of 14 classes of common drugs of abuse in postmortem urine by the point-of-care screening device, Alere iCup DX 14, is presented. One hundred ninety postmortem urine samples were screened with the iCup occurring at autopsy by the forensic pathologist. Positive and negative results obtained from the screening kit were evaluated against confirmatory test results obtained using routine forensic toxicology analyses that employed LC-MS/MS and GC-MS to detect a combination of over 85 common drugs of abuse and medications. Sensitivity for each respective iCup drug class ranged from 66% (buprenorphine) to 100% (methadone, tricyclic antidepressants). Specificity for each respective iCup drug class ranged from 89% (benzodiazepines) to 100% (amphetamines, barbiturates, buprenorphine, 3,4-methylenedioxymethamphetamine, methadone). Positive predictive values ranged from 44% (benzodiazepines) to 100% (amphetamines, barbiturates, buprenorphine, methylenedioxymethamphetamine, methadone), while negative predictive values ranged from 96% (methamphetamine) to 100% (barbiturates, methadone, tricyclic antidepressants). A high false-positive rate was yielded by the benzodiazepine class. The lack of fentanyl screening in the point-of-care device is a significant limitation considering its prolific prevalence in forensic casework. The results obtained in the study should be acknowledged when considering the use of the Alere iCup DX 14 in the context of postmortem casework to help indicate potential drug use contemporaneously with autopsy and when requiring such preliminary results prior to the release of a final forensic toxicology report.

Detection of Drugs in Oral Fluid Samples Using a Commercially Available Collection Device: Agreement with Urine Testing and Evaluation of A and B Samples Obtained from Employees at Different Workplace Settings with Uncontrolled Sampling Procedures.

The use of oral fluid tests to detect drugs is of growing interest in various areas, including treatment centers, roadside and workplace testing. In this study, we investigated drug detection in oral fluid samples collected using a commercially available device, Oral Eze. Drug detection in oral fluid was compared to paired urine samples, which were simultaneously collected. We also evaluated the collection device by comparing A and B oral fluid samples. Finally, we studied the stability of various drugs in samples stored for at least 1 year. The drug profile was investigated by comparing the drugs detected in oral fluid samples with paired urine samples collected in a treatment center. A total of 113 paired oral fluid and urine samples were investigated for the presence of drugs in the following groups: amphetamines, benzodiazepines, opiates and opioids, cocaine and cannabis. A and B samples were collected from different workplaces through an uncontrolled sampling procedure (n = 76). The stability of drugs in A samples was assessed after storage at -20°C for 1 year. Generally, there was a good correlation between drugs detected in oral fluid samples and urine samples. The heroin metabolite, 6-MAM, was more frequently detected in oral fluid samples than in urine samples, while cannabis was better detected in urine samples. Drugs in oral fluid samples were stable when stored at -20°C for at least 1 year. However, in many positive A and B oral fluid samples, there was significant variation in the concentrations obtained. Hence, the collection device may need to be further standardized and improved.

Strategies for accelerating the implementation of non-intrusive alcohol detection systems in the vehicle fleet.

INTRODUCTION: Crashes involving drinking drivers represent as much as one-third of all fatal crashes around the world. Progress has been made in reducing this toll through a series of interventions that attempt to discourage driving while intoxicated (DWI) and reoffending among drivers who have been convicted of DWI. However, these approaches cannot eliminate the problem. In-vehicle technologies are being developed, such as the Driver Alcohol Detection System for Safety-commonly referred to as DADSS-that have the potential to prevent alcohol-impaired drivers from driving their vehicles. DADSS in-vehicle sensors are designed to quickly detect whether drivers have been drinking and accurately and precisely measure blood or breath alcohol concentration. If the driver's alcohol concentration measures at or above a set limit, the vehicle will be prevented from moving. METHOD: The DADSS technology is expected to be ready for real-world applications in the next few years. The implementation of this technology in vehicles promises to prevent thousands of deaths and injuries every year. This paper investigates approaches that have been used in various countries to accelerate the deployment of innovative vehicle safety technologies beginning with its initial implementation in vehicles through to its more widespread use. RESULTS: Various approaches were identified that can smooth and accelerate the deployment of in-vehicle alcohol detection devices. Recommendations are made regarding the most promising approaches to use initially and over time, as the body of evidence regarding their effectiveness grows. CONCLUSIONS: This paper provides guidelines for how best to stimulate the widespread adoption of in-vehicle alcohol-detection technology as a preventive measure so that its life-saving potential can be realized both in the United States and in other countries that may be open to the implementation of DADSS.

Hyphenated high-resolution mass spectrometry-the "all-in-one" device in analytical toxicology?

This trend article reviews papers with hyphenated high-resolution mass spectrometry (HRMS) approaches applied in analytical toxicology, particularly in clinical and forensic toxicology published since 2016 and referenced in PubMed. The article focuses on the question of whether HRMS has or will become the all-in-one device in these fields as supposed by the increasing number of HRMS presentations at scientific meetings, corresponding original papers, and review articles. Typical examples for the different application fields are discussed such as targeted or untargeted drug screening, quantification, drug metabolism studies, and metabolomics approaches. Considering the reviewed papers, HRMS is currently the only technique that fulfills the criteria of an all-in-one device for the various applications needed in analytical toxicology.Graphical abstract.

Potential lives saved by in-vehicle alcohol detection systems.

OBJECTIVES: The objective of this study was to estimate the number of crash deaths specifically attributable to alcohol-impaired driving, with a focus on various strategies for introducing vehicle-based solutions. If alcohol detection systems are standard in all new vehicles, how many lives could be saved in the near term, and how long will it take to essentially eliminate alcohol-impaired driving? Alternatively, if such systems are offered as an option, how many lives could be saved? METHODS: Fatal crashes in the United States during 2015-2018 were classified by the highest driver blood alcohol concentration (BAC) and the corresponding age category of that driver. Based on the estimates of relative risk (RR) for a given driver group, eliminating alcohol in the driver's blood should lower risk by the attributable proportion, 1 - 1/RR. Multiplying this quantity by the number of deaths for the driver group yielded the estimated number of lives potentially saved if the BACs were reduced to zero. RESULTS: Systems that restrict drivers with any BAC could prevent nearly 12,000 deaths per year, while systems that restrict BAC to less than 0.08 g/dL could prevent more than 9,000 deaths. Within 3 years of a mandate for vehicle-based alcohol detection systems, it is expected that the annual lives saved would be between 1,000 and 1,300. Within 6 years, it would be between 2,000 and 2,600 lives saved per year, and within 12 years it would be between 4,600 and 5,900 lives saved per year. A system required only for those convicted of alcohol-impaired driving could save between 800 and 1,000 lives per year. A system available only to fleets of vehicles could save between 300 and 500 lives per year. CONCLUSIONS: Vehicle-based interventions will not immediately solve the problem of alcohol-impaired driving, but they are an important component of the overall strategy. Even if required as standard equipment in all new vehicles, it will take 12 years before there are enough to reach more than half of their potential. If vehicle-based interventions are instead voluntary or introduced as options, then progress toward a solution will be much slower.

Dried blood spots for anti-doping: Why just going volumetric may not be sufficient.

The perspective discusses quantitative DBS analysis for anti-doping testing in an athletic population and why only using volumetric sampling for this subgroup might not be enough. It presents examples to highlight where HCT variations occur, followed by a whole blood to plasma ratio and an HCT extraction bias discussion. Finally, options to correct for the HCT bias are presented.

Molecularly imprinted polymer-based device for field collection of oral fluid samples for cocaine identification.

In this paper, a low-cost, rapid, easy, and potentially portable tool for the identification of cocaine and its semi-quantitative determination in oral fluid has been proposed. A field collection device has been designed, based on a cotton pad with an indicator and a molecularly imprinted polymer (MIP) sorbent, to selective retain cocaine from oral fluid components. After sample collection, cocaine is transferred by using phosphate buffer to the MIP and then eluted with 2-propanol. The obtained extract is analysed by ion mobility spectrometry (IMS), providing a cut-off value of 20 µg L-1 that identifies 100 % true-positive and 95 % true-negative samples. The MIP-IMS procedure has been validated by the analysis of oral fluid samples, collected from cocaine users at recreation environments, by comparing the results with lateral flow immunoassay and chromatographic reference methods. Thus, the proposed methodology allows a simple and fast cocaine identification that can be carried out in field by non-specialized personnel, such as health personnel, law enforcement bodies, and customs staff.

Providing illicit drugs results in five seconds using ultra-portable NIR technology: An opportunity for forensic laboratories to cope with the trend toward the decentralization of forensic capabilities.

The analysis of illicit drugs faces many challenges, mainly regarding the production of timely and reliable results and the production of added value from the generated data. It is essential to rethink the way this analysis is operationalised, in order to cope with the trend toward the decentralization of forensic applications. This paper describes the deployment of an ultra-portable near-infrared detector connected to a mobile application. This allows analysis and display of results to end users within 5s. The development of prediction models and their validation, as well as strategies for deployment within law enforcement organizations and forensic laboratories are discussed.

A threshold LC-MS/MS method for 92 analytes in oral fluid collected with the Quantisal® device.

A study of impaired driving rates in the province of Québec is currently planned following the legalization of recreational cannabis in Canada. Oral fluid (OF) samples are to be collected with a Quantisal® device and sent to the laboratory for analysis. In order to prepare for this project, a qualitative decision point analysis method monitoring for the presence of 97 drugs and metabolites in OF was developed and validated. This high throughput method uses incubation with a precipitation solvent (acetone:acetonitrile 30:70 v:v) to boost drug recovery from the collecting device and improve stability of benzodiazepines (e.g., α-hydroxyalprazolam, clonazepam, 7-aminoclonazepam, flunitrazepam, 7-aminoflunitrazepam, N-desmethylflunitrazepam, nitrazepam). The Quantisal® device has polyglycol in its stabilizing buffer, but timed use of the mass spectrometer waste valve proved sufficient to avoid the glycol interferences for nearly all analytes. Interferences from OF matrices and 140 potentially interfering compounds, carryover, ion ratios, stability, recovery, reproducibility, robustness, false positive rate, false negative rate, selectivity, sensitivity and reliability rates were tested in the validation process. Five of the targeted analytes (olanzapine, oxazepam, 7-aminoclonazepam, flunitrazepam and nitrazepam) did not meet the set validation criteria but will be monitored for identification purposes (no comparison to a cut-off level). Blind internal proficiency testing was performed, where six OF samples were tested and analytes were classified as "negative", "likely positive" or "positive" with success. The final validated OF qualitative decision point method covers 92 analytes, and the presence of 5 additional analytes is screened in this high throughput analysis.

Trends using biological target-based assays for drug detection in complex sample matrices.

In vivo, drug molecules interact with their biological targets (e.g., enzymes, receptors, ion channels, transporters), thereby eliciting therapeutic effects. Assays that measure the interaction between drugs and bio-targets may be used as drug biosensors, which are capable of broadly detecting entire drug classes without prior knowledge of their chemical structure. This Trends article covers recent developments in bio-target-based screening assays for detecting drugs associated with the following areas: illicit products marketed as dietary supplements, food-producing animals, and bodily fluids. General challenges and considerations associated with using bio-target assays are also presented. Finally, future applications of these assays for drug detection are suggested based upon current needs.

A clinical investigation into the ability of subjects with a lung disease to provide breath specimens using the Dräger 6510.

In the enforcement of drink driving laws failing to provide a breath specimen for alcohol analysis at the roadside when requested by a Police Officer is an offence in many countries. Some drivers claim that a lung disease prevented their ability to be successful. This study aims to investigate the relationship between the presence of a lung disease and the ability to provide a successful breath specimen using the Dräger 6510 screening device. Sixty participants with lung disease and nineteen control participants underwent pulmonary function tests and were then tested with a Dräger 6510 screening device. Only one participant was unsuccessful using the Dräger 6510, this participant suffered from interstitial lung disease. The pulmonary function test results did not indicate if someone would be successful or how many attempts would be needed to be successful. The presence of a lung disease did not indicate if a driver would be unsuccessful however all participants were free from infection and the participants with a lung disease were stable at the time of testing. Correct instruction, subject cooperation and the technique used by the driver to provide a breath specimen were found to be important factors in the success of a breath test.

Fully automated dried blood spot sample preparation enables the detection of lower molecular mass peptide and non-peptide doping agents by means of LC-HRMS.

The added value of dried blood spot (DBS) samples complementing the information obtained from commonly routine doping control matrices is continuously increasing in sports drug testing. In this project, a robotic-assisted non-destructive hematocrit measurement from dried blood spots by near-infrared spectroscopy followed by a fully automated sample preparation including strong cation exchange solid-phase extraction and evaporation enabled the detection of 46 lower molecular mass (< 2 kDa) peptide and non-peptide drugs and drug candidates by means of LC-HRMS. The target analytes included, amongst others, agonists of the gonadotropin-releasing hormone receptor, the ghrelin receptor, the human growth hormone receptor, and the antidiuretic hormone receptor. Furthermore, several glycine derivatives of growth hormone-releasing peptides (GHRPs), arguably designed to undermine current anti-doping testing approaches, were implemented to the presented detection method. The initial testing assay was validated according to the World Anti-Doping Agency guidelines with estimated LODs between 0.5 and 20 ng/mL. As a proof of concept, authentic post-administration specimens containing GHRP-2 and GHRP-6 were successfully analyzed. Furthermore, DBS obtained from a sampling device operating with microneedles for blood collection from the upper arm were analyzed and the matrix was cross-validated for selected parameters. The introduction of the hematocrit measurement method can be of great value for doping analysis as it allows for quantitative DBS applications by managing the well-recognized "hematocrit effect." Graphical abstract.